Sanya kwalabe da hannu ko kwalabe na atomatik, ko ciyar da kwalabe ta atomatik, saka kwalabe ta atomatik a cikin mold, cika ta atomatik, manual / saka iyakoki ta atomatik, ƙwanƙolin dunƙule atomatik / latsawa, kuma samar da samfuran da aka gama ta atomatik.
manual samfurin:
1. Wannan samfurin shine na'ura mai haɗawa da na'ura da wutar lantarki, wanda zai iya ganewa ta atomatik cika cika da capping na kananan kwalabe na kayan.Yana ɗaukar hanyar zagayawa mai ɗaukar bel don gane hanyoyin sarrafa kwalabe ta atomatik, ciyar da kwalban, cikawa, sanya hular waje, latsa hula, da fitar da kwalba ta atomatik, kuma aikin yana da daidaito da kwanciyar hankali.
2. Wannan injin yana kunshe da mahimman sassa irin su kwalabe na atomatik, cikawa mai ƙididdigewa, daidaitaccen matsayi na rarrabawa, sakawa na waje na atomatik, capping, manipulator ejection kwalban da wutar lantarki.An haɗa na'ura da wutar lantarki don tabbatar da kwanciyar hankali.
3. An yi amfani da shi sosai a cikin samar da kayan aiki ta atomatik na abinci, magunguna, sinadarai na yau da kullum, da dai sauransu. Wannan tsarin an tsara shi musamman bisa ga nau'in kwalban abokin ciniki.
tsarin aiki:
Da hannu sanya kwalabe a cikin kwalban unscrambler turntable, kwalabe suna ta atomatik jerawa fitar da ta atomatik shigar da kwalban mold;kwalaben ne da bel din na'ura ya tuka su suka shiga cikin tasha daya bayan daya, kai tsaye mai cika ya hango kwalaban sannan ya cika da adadi, sannan bayan sun cika sai su shiga sashin sakin hular atomatik, bayan an danna hular, sai a aika. zuwa mashin kwalbar, kuma robot ɗin ta atomatik ya fitar da samfurin da aka gama kuma ya sanya shi a kan abin da aka gama.PLC ne ke sarrafa dukkan tsarin, kuma ana kammala zagayowar samarwa ta atomatik.
babban fasali:
1. Wannan injin yana ɗaukar cika ƙididdiga, babban cika madaidaicin, daidaitawa mai dacewa, tsari mai sauƙi, mai sauƙin rarrabawa da tsaftacewa.
2. An saita ƙirar daidai kuma yana gudana cikin sauƙi.
3. Yana ɗaukar kwalabe na atomatik unscramble, girgiza hular don shirya hular, kwalban ya fita daga cikin hular, aikin yana da kwanciyar hankali, tattalin arziki da dorewa;
4. PLC yana sarrafa aikin injin gabaɗaya, zai iya adana tsarin samarwa ta atomatik, kuma ya kira shi cikin sauƙi da sauri.Ayyukan allo na taɓawa, aiki mai sauƙi da sauri da kiyayewa.
5. Matsakaicin saurin jujjuya mitar, babu ƙarancin kwalban, ƙididdigewa ta atomatik, babban matakin sarrafa kansa.
6. Daidaitaccen shigarwa na lantarki, wanda aka aiwatar daidai da ka'idodin CE, manyan sassan lantarki an yi su ne daga sanannun alamun duniya, tare da ƙarancin gazawar, aiki mai aminci, kwanciyar hankali da dorewa.
7. Dukan inji an yi shi ne da babban ingancin SUS304 bakin karfe, wanda aka yi da 2A12, wanda yake da kyau da sauƙin tsaftacewa da kulawa.
Lokacin aikawa: Mayu-17-2021